臺(tái)式高斯計(jì)，在線高斯計(jì)
The measurement of magnetic fields with handsets is quite practical, but when it comes to the automated use in a process chain, battery-powered devices with unidirectional interface are not sufficient. If you need to measure magnetic fields in the process flow, transfer the results directly to the process control, and derive immediate analyzes, then you need a device with high measurement accuracy and integration capability: MP-5000. With RS232 / USB interface and graphic control panel.
Via the interface you can integrate the device into your production environment, control the measurement and use the feedback for decision-making in the process chain.
Proven probes are used which guarantee a stable repeatability of the measurements with their high measuring accuracy. The axial field probe P-A2 measures the field in the direction of the probe and is suitable for measuring on flat or curved surfaces or especially in holes. The Hall sensor in the axial field probe is positioned at a defined measuring distance of 2.0 mm from the measuring surface. The tangential field probe P-T2 measures the field at right angles to the direction of the probes and is suitable for measuring in air gaps, cavities or on the surface of workpieces.
Technical Data Magnetic Field Meter / Magnetometer / Gaussmeter / Teslameter MP-5000 | |
| Measuring units: | A/cm - kA/m - Gauss(Oe) - Tesla (1 A/cm = 0.1 kA/m = 1.256 Gauss = 1.256 Oersted = 0.1256 mT) |
| Applicable measuring probes: | Axial probes P-A2, P-W2 and P-A4,Tangential probes P-T2, P-T4, P-Z2, P-Z4 and P-T4A. |
| Measuring range DC: | 0-40,000 A/cm |
| Measuring range AC: | 20-20,000 A/cm |
| Accuracy: | in the homogeneous field ± 1 A/cm up to 50 A/cm, ± 2 % of measured value from 50 A/cm, ± 3 % of measured value from 20,000 A/cm |
| Resolution: | 0-200 A/cm: 0.1 A/cm, > 200 A/cm: 1 A/cm, > 10,000 A/cm: 10 A/cm |
| Frequency range AC: | 10 Hz – 5 KHz |
| Peak Hold: | with impulse duration >= 0.1 msec |
| Display: | graphical PLC operating terminal with menu guidance, display of measured values digital or analog, and trend measurement |
| Multilingual menu navigation: | German / English |
| Data logger: | 500 measurements |
| Statistics: | Count / Maximum / Minimum / Average / Standard deviation |
| Interfaces: | RS232 interface with USB cable for communication with PC, 24V analog signal interface for process control |
| Power supply: | 230V |
| Dimensions: | 145 x 145 x 220 mm |
| Weight: | 1800 g with probe and power supply |
Magnetic Field Meter MP-5000 without probe, with probe cable and USB cable.
The measuring probe needs to be ordered separately.
